Think Tank
Transform a galvanized stock tank into fabulously functional outdoor décor.
What You'll Need
100-gallon galvanized stock tank 5218-523
mineral spirits 1620-644
sanding sponge 220 grit 1061-069
STICK iT latex primer 1850-792
Designer Series Exterior Suede paint
clear marine silicone sealant 2031-161
4” rigid castors (2) 2324-109
4” swivel castors (2) 2324-105
hardware for castors
Here's How
See ‘Paint It Perfect’ for tips to prepare and paint the tank.
Measure, mark, drill and attach the rigid plate casters at one end of the tank. Repeat at the other end with the swivel castors.
Seal the castors’ holes with silicone.
Keep Cool and Party On!
The perfect party cooler! The aluminium helps keep the ice lasting longer and the tank has a drain on the side to empty the cooler when the party's over.
Shopping List
30’ of 1” x 10” common pine
1 1/4” #8 screws
4’ pipe clamps
exterior wood glue 2020-869
jig saw 1268-536
router 1258-514
Here’s How
Upper Layer
Cut six pieces of 1” x 10” pine 6” longer than tank.
Glue edges of three of the pieces together and clamp. Set aside the remaining three pieces for the lower layer.
Step 1 Wipe the surface with mineral spirits to remove the oil film from new galvanized metal.
Step 2 Scuff the surface with a 220-grit sanding sponge.
Step 3 Prime with BeautiTone STICK iT primer sealer. The hard, smooth surface of galvanized metal can make it difficult for paint to adhere, however this primer is a problem solver. It is formulated to bond to galvanized metal.
Step 4 Choose a gorgeous colour in either exterior Designer Series or Rust Coat water-based paint.