2kg Anchoring Cement

Overview

Anchoring Cement

• Is a pourable, fast setting, high strength, expansive anchoring cement
• Controlled expansion assures a tight grip on both the fixture and the surrounding concrete
• Is ideal for setting anchor bolts, screws, posts, railings, reinforcing rods and other fixtures in existing concrete
• Can be used as a base plate grout to level industrial machinery or to level concrete floors under carpet or soft tile
• For anchoring bolts, rods, railings, etc. drill a hole that will allow a minimum of 1/2" of King flow-stone to surround the fixture being anchored
• Holes should be at least 2" deep
• For levelling concrete floors, thoroughly clean and roughen the surface
• In all applications the existing concrete must be sound and clean
• Soak the area with clean water and remove any standing water MIXING:
• Use clean containers and clean water
• Add product slowly while mixing
• Avoid a "soupy" mix
• For anchoring fixtures in concrete floors, best results are obtained with a batter like consistency - about 260 mL (9oz) of water to 1kg of product
• For anchoring fixtures in concrete or masonry walls, a putty like consistency is required - about 228mL (8oz) of water to 1kg of product
• Strength, hardness and fluidity are directly dependent on the water to compound ratio
• Mix thoroughly
• Add any extra water sparingly APPLICATIONS:
• For anchoring bolts, rods, railing, etc. in concrete floors, place the fixture into the prepared hole and pour the mix around it
• Tap the fixture to help settle the mix in the hole
• Pour a slight excess of flow-stone around the fixture to achieve a dome shape taper about 1cm higher that the surrounding concrete
• This will prevent water from accumulating around the base
• For levelling concrete floors, trowel or pour King flow-stone onto the prepared surface
• When mixed to a flowable consistency, our product is self-levelling
• Do not use f

Overview