18.9L Concrete Water Repellent

Overview

Concrete Water Repellent

• For vertical / above grade concrete water repelling
• Ideal for architectural rough face block, smooth block, calcite brick, non-glazed concrete roof tiles and chimneys
• Water based / no odour
• Invisible / will not alter concrete colour
• Up to 10 year protection
• Completely breathable
• Industrial strength protection against water damage from freeze-thaw cycles, mold and mildew build up and acid rain
• Not a coating but a chemically reactive sealer which will not alter the concrete's original color
• Penetrates deeply to work from within, which means no coating to wear off and no change in surface appearance
• 24 hour cure time
• Water based, colourless and odourless, which makes application and clean up extremely easy (rinse with soap and water)
• Will function on clay surface but may produce residual salt stains which may require scrubbing or power washing DIRECTIONS:
• For new installations, wait a minimum of 30 days for concrete to cure and settle before water repelling: (Step 1) this product is not an elastomeric coating - thus will not span cracks or gaps in concrete and mortar; replace any broken brick or block and re-point all cracked or separated mortar joints at least 30 days prior to proceeding to step 2: (Step 2) if concrete appears fairly clean, then wash concrete from the top down with a power washer and clean water only; allow to dry prior to proceeding to step 3: (Step 3) important: before commencing, cover and protect all exposed glass and non- painted metal from coming in contact with the water repellent; Stonesaver Concrete Water Repellent may be applied by a using a brush or preferably a low pressure - constant volume (plastic sprayer); avoid over spray onto vegetation, etc.; apply at temperatures above 7 degrees C. (45 degrees F) and not in direct hot sunlight; on warm days, lightly dampen surface prior to produc

Overview