1L Surface Cleaner, for Stone, Concrete and Pavement

Overview

Concrete & Pavng Stone

• Cleans dirt, efflorescence & tire tracks
• Will not harm concrete surfaces
• Ensures proper sealer to surface bonding
• Easy to use with auto-diluting E-Z Sprayer
• Formulated to remove efflorescence (white salt deposits), dirt and tire tracks from your paving stone and concrete surfaces
• Contains no muriatic or hydrochloric acids which can damage concrete surfaces
• The proper removal of dirt and efflorescence is imperative to ensure sealer to surface bonding and enhance the surface colour prior to sealer application
• Comes complete with the "E-Z Sprayer" water hose end adapter, which automatically dilutes and disperses this highly concentrated cleaner at a ratio of 20 parts water to 1 part cleaner which eliminates chemical mixing procedures and the need for costly professional equipment or the inconvenience of using heavy jug dispensers DIRECTIONS:
• (Step 1) Remove all stains with the appropriate Stonesaver stain cleaners
• (Step 2) Simply attach your water hose to the inlet port of the E-Z Sprayer and you are ready to start; always pre-wet the surface with water before each application of Stonesaver Cleaner & Surface Prep; working quickly, start at the lowest point of your surface and work in 27 sq. m (300 sq. ft.) pre measured sections; work side to side, making sure the entire surface is covered; if there is still cleaner remaining in the bottle after the 300 sq. ft. section has been covered, apply the remaining cleaner as an additional spray over the same area; this will reinforce the cleaning application and prevent drying of the surface; use a long handled stiff bristled broom to brush the treated area, loosening stubborn dirt and deposits; rinse thoroughly (usually 5 - 6 rinses with 2 water hoses) until foaming is no longer visible; be sure to rinse all cleaner from the surface as you progress to additional sections until the entire surface is clea

Overview