1L Citrus Oil Degreaser

Overview

Concrete & Pavng Stone

• For paving stones and concrete
• A unique blend of concentrated citrus extracts (oils of orange, lemon, lime, etc.) and emulsifiers making it one of the most effective oil and grease stain removers available DIRECTIONS:
• (Step 1) Pre-wet stained area with water; apply a liberal amount of Citrus Oil Degreaser to the stained area; vigorously scrub stain with a stiff bristle scrub brush; repeat (Step 1) and rinse away cleaner and residue thoroughly with water (strong water pressures work best); stains that have deeply penetrated into the concrete may resurface repeatedly after initial cleaning and drying; repeat (Step 1) as often as required to eliminate all saturated oils; stains that have penetrated the sealed surface can only be extracted by first stripping (with Stonesaver Stripper) the sealer away from the effected area and then applying Citrus Oil Degreaser as instructed; remove all stains with the appropriate Stonesaver stain cleaners
• (Step 2) Clean entire surface with Stonesaver Concrete Cleaner & Surface Prep
• (Step 3) Seal the surface with the appropriate Stonesaver Sealer WARNING:
• Do not mix with toilet bowl cleaners, bleach or other household chemicals
• Do not swallow, get in eyes or on skin or clothing
• Do not breathe fumes
• Keep out of reach of children
• Wear a NIOSH-approved respirator, rubber gloves and safety goggles
• Use only in a well-ventilated area FIRST AID TREATMENT:
• Contains Sodium metasilicate and Nonyl phenol ethoxylate; if swallowed, call a Poison Control Centre or doctor immediately; do not induce vomiting; if in eyes, rinse with water for a least 15 minutes; if on skin, rinse well with water; if on clothes, remove clothes; if breathed in, move person to fresh air

Overview