2.5L Concentrated Clear Acrylic Paving Stone Sealer

Overview

Concentrated Acrylic Clear Paving Stone Sealer

• A unique concentrated sealer which represents our ongoing commitment to the development of environmentally responsible products and packaging
• Designed to minimize waste and energy consumption in the manufacturing process without compromising quality
• An interior/exterior clear sealer which protects surfaces from the staining of fuel, oil, greases, chemicals, dirt and grime
• Forms a hard durable film
• It also makes cleaning easier on rough surfaces such as textured anti-slip coatings
• For use on concrete, stucco, stone, masonry, brick, wood siding, wood decks and plaster ADVANTAGES:
• Will not harm humans, animals or vegetation
• Water based, no petroleum distillates, easy soap and water cleanup
• Goes on white, but dries clear
• Fast drying approximately 2 to 4 hours depending on temperature and humidity
• Paintable with acrylic/latex and oil based paints
• Protects against mildew, staining, salts, and acids PREPARATION:
• Remove yellow disc from the top of the box
• Pull up cap ring to pop up filling spout
• Add water to fill line (2.5 liters water)
• Replace screw on top and shake for approximately one minute APPLICATION:
• Surfaces to be coated should be clean and dry
• Repair cracks and holes
• Smooth concrete should be etched to allow penetration
• Apply sealer in an even coat using spray equipment or a high pile roller
• Only one coat is necessary
• Do not apply in direct sunlight
• Wash up tools with soap and water immediately after use CAUTION:
• Surface must be dry for at least 48 hours before application
• Excessive moisture may cause whitening (blushing)
• Should not be applied on chimneys
• Do not apply if rain is imminent
• Do not apply at temperatures below 10 celsius
• Do not use on surfaces that have been treated with water repellent coatings COVERAGE:
• One liter covers 3-7 M² depending on porosity of substrate PACKAGING:
• 2

Overview