20kg Asphalt Pothole Cold Patch

Overview

Permanent Pothole Cold Patch

• Is a high quality, pre-mixed, asphalt "cold patch" compound
• Combining carefully selected aggregate with a bitumen formula, it is the best choice for all types of pavement repairs
• Restores dangerous potholes and wide cracks within minutes, regardless of the weather
• Suitable for use on both concrete and asphalt pavement
• Can be applied year round to either wet or dry pavement
• The most important benefit to remember is the fact that is is the "permanent patch" and remains in the repaired area indefinitely
• Money will be saved on labour costs because workers will not be repeatedly repairing an area, when a cheaper brand of "cold patch" asphalt mix is used
• Is easy to apply with most repairs taking only a few minutes to complete
• As an added feature, it can be open to traffic immediately after being used
• Remains flexible and cohesive to -26'C (-15'F) and retains it's adhesive qualities even in wet applications PREPARATION:
• Simply sweep out the area to be repaired with a bristled brush or broom
• It is a good idea to remove any loose debris, dirt, ice or standing water from the area to be repaired
• This will promote better adhesion and bonding APPLICATION: ASPHALT:
• No heating or mixing required
• Shovel it into the pothole or crack, straight from the container
• When the fault is especially deep, ie. over six inches apply it in two inch layers, compacting each layer in succession
• Shovel enough material into the fault to slightly crown the "patch"
• When completed compress the "patch" with shovel or tamper
• Area can be opened to traffic immediately CONCRETE:
• Apply as you would in Asphalt application
• When completed and ready to compress the patch, sprinkle a coating of Portland Cement over the surface
• The cement is to even the colour between the patch and the concrete
• Put enough to cover the entire surface
• Compress the "patch" w

Overview