1L Asphalt Driveway Oil Spot Primer
BLACK GOLD Item #2060-218 Model #6433-9-15-HH

Overview
Black Gold Oil Spot Primer
- Is water based polymer sealant that is formulated to seal petroleum base stains prioir to applying Coal Tar or Acrylic based sealant
- These petroleum stains, that often contain residual oil, grease, diesel fuel and gasoline are usually located on the pavement beneath parked vehicles
- If not properly treated, these petroleum stains will continue to dissolve the asphalt pavement underneath eventually resulting in an ugly pothole or "birdbath" in the pavement
- Even at the very least, unchecked oil stains will quickly "bleed" up through the brand new sealing job, within a matter of days, leaving an unattractive mottled effect on the pavement
- Easy to apply, will neutralize the detrimental effects of the petroleum stain as well as protecting the area from future spills PREPARATION:
- Locate individual petroleum stains on the pavement surface that required treating
- Wipe or scrape off any excess oils that may be present on the surface of the soiled
- Scrub the petroleum stained area with Excel Oil Spot Cleaner APPLICATION:
- Shake contents well before using
- Apply this directly from the container onto the petroleum stain surface with either a paintbrush or roller
- For best results, overlap the stain by several inches to ensure proper coverage
- Once dry; apply pavement "sealer" over entire treated area of pavement COVERAGE:
- Usually requires only one coat providing surface oils were wiped up prior to application
- As a rule, 1L will seal 22-32 sq.ft. of petroleum-stained pavement DRYING TIME:
- Will cure and be ready for the finish "sealing coat" within one hour CLEAN UP:
- Brushes and rollers should be washed immediately on completion of the job in warm, soapy water









