3.4KG Anti-Slip Floor Coating

Overview

Anti-Slip Coating

• Is a waterborne, acrylic based, quartz, non-cementitious, anti-slip coating in a brush and roll down formulation
• It is environmently safe, non-flammable and non-hazardous
• Is neutral in colour
• Any decorative colour is available by adding the desired colour of exterior gloss, semi-gloss, satin acrylic latex, acrylic floor enamel or industrial acrylic enamel paint (on a ratio of 1 litre/946ml to 3.4kg pail or 3.78L to a 17kg paint)
• Simply mix thoroughly when adding paint
• When fully cured, it is hard and tough yet flexible
• On horizontal surfaces its Anti-Slip on vertical surfaces it provides a heavy duty textured finish
• It is weather resistant, impact resistant, salts and chlorine resistant when fully cured
• May be cleaned up with water and after application, before it has dried ADVANTAGES:
• Versatile - anti-slip, protective, decorative
• Weather resistant, tough and flexible
• Easy to use - unlimited colour selection - indoor and outdoor
• Walkways, patios, stairs, pools, decks, balconies and carports
• Waterborne acrylic, non-flammable and environmentally safe
• Machine shop, garage and workshop floors PREPARATION:
• Remove dust, dirt and debris using stiff brush or broom
• Concrete surfaces must be clean and dry before applying
• For best performance smooth concrete surface may require acid etching before sealing
• Bare metal surfaces require priming with appropriate primer
• All non-metal surfaces must be primed with Excel Acrylic Waterproofer before application
• Allow sealer to dry for 2-4 hours before applying
• Fill all cracks using a high quality, concrete patch mix
• Allow to set/cure according to manufacturers instructions APPLICATION:
• Add the desired colour of preferred paint to the selected unit of Anti-Slip
• Mix well with a mechanical mixer or on a shaker
• Will take on the same colour of the paint used
• The roller must

Overview