18.9L Fox Grey Granite Coating

Overview

Granite Floor and Wall Coating (Step 2)

• Granite's quartz aggregate provides an extremely hard surface that is highly resistant to abrasion
• The acrylic resins provide superior elasticity, adhesion and low water absorption
• It can also remain breathable to permit the normal transmission of moisture vapour through the coating to assist in protecting against trapped moisture
• Low water absorption protects against rain and snow while maintaining elasticity and superior resistance
• Special additives protect the acrylic resins from ultra-violet rays and discolouration and assure long life, durability and performance FEATURES:
• Breathability
• Low shrinkage
• Colourfast
• Ultra-violet brittle resistant
• Bacteria resistant
• Resistant to freeze/thaw conditions
• Flexibility
• Pre-mixed
• Easy maintenance
• Crack resistant
• Alkali resistant
• Abrasion and impact resistant
• High resistantance to salt DESCRIPTION:
• 100% acrylic emulsion coating with colored quartz compounds which provide a flexible, breathable, water repellent decorative finish for long life and durability USES:
• Designed as finishes for stationary exterior or interior concrete, drywall and masonry floors and decks YIELD:
• Varies with substrate conditions, and application methods
• Average coverage 32 sq. ft. per one gallon pail SURFACE PREPARATION:
• Surface should be clean and dry, free from efflorescence, laitance, dust, dirt, loose flaking, oils, poorly bonded or glossy paint, surface sealers, salts and other contaminates which may effect adhesion and product performance
• New masonry surfaces should be allowed to cure a minimum of 48 hours prior to application
• Surface area should be power washed using at least 2500 psi to clear any surface contaminates
• Smooth, new and efflorescent surfaces should be etched using a muriatic acid/ water solution (2 parts water/1 part muriatic ac

Overview