300mL Mortar Repair

Overview

Mortar Repair

• Water resistant acrylic formula that stays flexible
• Textured and coloured to give the appearance of masonry mortar
• Product has minimal shrinkage, excellent adhesion, and is non-flammable
• Unique square opening is ideal for filling 3/8" mortar joints DIRECTIONS:
• Use to seal cracks and mortar joints in masonry walls 1) Joints must be clean, dry and free of grease, dust, or loose particles Remove all loose mortar from the joint before filling 2) Puncture seal inside the applicator tip Use cartridge in standard caulking gun 3) Apply by pushing cartridge tip over surface and forcing bead of caulking into the opening Apply no thicker than 3/8 " (10 mm) 4) Tip of applicator acts as a tool to smooth the surface 5) Excess can be wiped off with a damp cloth 6) Can be painted after 24 hr Use latex paint only LIMITATIONS:
• Air and surface temperature should be above 40 degree F (4 degrees C) for proper application
• Do not apply if rain threatens or is predicted within 12 hours
• Store between 35 degrees F (2 degrees C) and 100 degrees F (38 degrees C) COVERAGE:
• One 300 ml tube will fill a 3/8" x 3/8" (8 mm x 8 mm) mortar joint 14 ft. (4.3 m) long

Overview