825mL Black Gold Roof Repair Cement

Overview

Black Gold Roof Repair Cement

• Is a unique, roof repair compound formulated with rubber for longevity, and glass fibres for extra strength
• It stays soft and flexible for up to 20 years
• It can be applied in temperatures from 10'F (-12'C) to 122'F (50'C) on wet or dry surfaces and it will not wash off
• This product can be applied at any time of the year for quick roof repair jobs to loose shingles, flashing, gutters, chimneys and vents
• This product is not intended for use in adhering new shingle tabs ADVANTAGES:
• Rubberized: stays flexible and resists cracking
• Caulking grade: easy to use - requires no special skills or tools
• Versatile: a utility product with hundreds of uses on wet/dry surfaces
• Ideal for gutters: use to seal seams and coat gutters for extended life PREPARATION:
• Clean surface and remove loose dirt, debris, ice and snow PRECAUTIONS:
• This products is not intended for the use in adhering new shingle tabs APPLICATION:
• Apply with a caulking gun, may be tooled after with a brush or trowel
• Clean up with mineral spirits SPREAD RATE:
• 25 linear feet per 300ml @ 1/4 x 1/4"
• Meets ASTM D4586 and D3409
• Meets federal specification SS-C-153C, Type 1
• VOC=300g/1 maximum
• This product contains less than 2.5lbs of VOS per gallon of coating, excluding water SPECIFICATIONS:
• Flash point: 38'C (100'F)
• Viscosity (ASTM D217 modified) 310-360mm
• % Specialilty process asphalt: 50% min by weight
• Non-volatile (24 hrs. at 200'F): 70% min by weight
• %Total solids, by volume: 63% min.
• Cure film thickness of 1 gal/100sq.ft.: 10 MILS
• Cured coat tensile strength: 200psi
• Elongation of cured coating(ASTM D412): 150%
• Service temperature, extended exposure: -40'C to 82'C (-40'F to 180'F)
• Resistance to oils and solvents: none
• Resistance to sunlight: excellent
• Resistance to chemicals: good
• Water resistance - under good drainage conditions: excellent - under continuou

Overview