STONESAVER Penetrating Low Gloss Concrete & Paving Stone Sealer - 18.9 L

Stonesaver Penetrating Low Gloss Sealer provides the best possible protection for your paving stones and concrete surfaces against harsh pool chemicals, colour fading from UV rays, dirt, salt, grease, oil and rust stain penetration. It protects new surfaces and makes old stones look new again with dramatically enhanced colors.

• Solvent based
• For all types of concrete, paving stones & natural stone
• Gives wet look / low gloss
• One coat application
• Low slip factor
• Ideal for pool decks & sloped driveways
• Restores and enhances colour
• Will not peel and wears evenly
• Not to be used over glossy sealed surfaces
• Provides the best possible protection for your paving stones and concrete surfaces against harsh pool chemicals, colour fading from UV rays, dirt, salt, grease, oil and rust stain penetration
• Protects new surfaces and makes old stones look new again with dramatically enhanced colours
• Slow drying, deep penetrating acrylic polymer based sealer that provides most of its protection from inside the concrete rather than on the surface which results in a low gloss finish with non slip benefits
• Ideal for areas where non slip is a concern, such as residences occupied by the elderly, pool decks, high slope surfaces, tumbled stone and unsealed concrete surfaces which tend to have poor absorbency ratings

• 18.9 liters / 5 gallon covers approximately 45 to 55 sq. m. (500 to 600 sq. ft - per coat)
• Coverage can vary dramatically with the type and porosity of the surface as well as width of sand joints

• HH #2060-307, #2060-325 concrete cleaner, HH #2060-343 oil degreaser and HH #2060-389 concrete stripper

Our Return Policy

If you are not completely satisfied with your purchase, in most cases, you can return it for a refund within 90 days.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More