Home Hardware
1L Surface Cleaner, for Stone, Concrete and Pavement
  • Facebook
  • Twitter
  • Pinterest
  • Mail
  • Print
  • Google Plus

1L Surface Cleaner, for Stone, Concrete and Pavement

  • STONESAVER
  • Item # 2060325
  • Model # CL-1 SURFPRP
$32.99 /EA
In-store only. Contact your Home Store for pricing and availability

Overview

Details + Specification

  • Cleans dirt, efflorescence & tire tracks
  • Will not harm concrete surfaces
  • Ensures proper sealer to surface bonding
  • Easy to use with auto-diluting E-Z Sprayer
  • Formulated to remove efflorescence (white salt deposits), dirt and tire tracks from your paving stone and concrete surfaces
  • Contains no muriatic or hydrochloric acids which can damage concrete surfaces
  • The proper removal of dirt and efflorescence is imperative to ensure sealer to surface bonding and enhance the surface colour prior to sealer application
  • Comes complete with the "E-Z Sprayer" water hose end adapter, which automatically dilutes and disperses this highly concentrated cleaner at a ratio of 20 parts water to 1 part cleaner which eliminates chemical mixing procedures and the need for costly professional equipment or the inconvenience of using heavy jug dispensers
DIRECTIONS:
  • (Step 1) Remove all stains with the appropriate Stonesaver stain cleaners
  • (Step 2) Simply attach your water hose to the inlet port of the E-Z Sprayer and you are ready to start; always pre-wet the surface with water before each application of Stonesaver Cleaner & Surface Prep; working quickly, start at the lowest point of your surface and work in 27 sq. m (300 sq. ft.) pre measured sections; work side to side, making sure the entire surface is covered; if there is still cleaner remaining in the bottle after the 300 sq. ft. section has been covered, apply the remaining cleaner as an additional spray over the same area; this will reinforce the cleaning application and prevent drying of the surface; use a long handled stiff bristled broom to brush the treated area, loosening stubborn dirt and deposits; rinse thoroughly (usually 5 - 6 rinses with 2 water hoses) until foaming is no longer visible; be sure to rinse all cleaner from the surface as you progress to additional sections until the entire surface is cleaned and thoroughly rinsed; do not let cleaner dry on surface; an additional water hose will facilitate rinsing; mist surface with water if it begins to dry while cleaning; when the entire surface is cleaned and well rinsed, allow to dry and inspect; repeat application to any white areas if necessary
  • (Step 3) Seal the surface using the appropriate Stonesaver sealer
COVERAGE:
  • If used in accordance with supplied directions; 1 litre/1 Quart covers a maximum 27 sq. m (300 sq.ft.)
  • Do not mix with oven cleaners, bleach or other household chemicals; do not swallow; do not get in eyes; do not get on skin or clothing; do not breathe fumes; handle with care; keep out of reach of children; wear a NIOSH-approved respirator; wear rubber gloves and safety goggles; use only in a well-ventilated area
FIRST AID TREATMENT:
  • Contains Phosphoric acid, Sulfuric acid and Sodium dodecyl diphenyloxide disulfonate; if swallowed, call a Poison Control Centre or doctor immediately; do not induce vomiting; if in eyes, rinse with water for a least 15 minutes; if on skin, rinse well with water; if on clothes, remove clothes; if breathed in, move person to fresh air
Free Shipping to Stores

Free Shipping to Stores

Pick-Up is Easy

Pick-Up is Easy

Free Returns

Free Returns