CANPLAS 2" Slip x Spigot ABS Expansion Joint

Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to. Allows for up to 3" of travel whcih allows for movement without leakage. Approved for both vertical and horizontal application. The flow direction and proper degree of extention is indicated on the expansion joint. Removed the stress from both pipe anf fittings which could cause failure of the piping system.

• Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to
• Injected molded in ABS (Black)
• Nitrile Buna-N O-ring
• PQAA Grease #2 lubricant
• Allows for up to 3" (7.6 cm) of travel (Type I)
• Flow direction and proper degree of extention indicated on expansion joint
• Approved for use in vertical and horizontal application
• Allows movement without leakage
• Removes the stress from both pipe and fittings which could cause failure of the piping system

• For Drain, Waste & Vent applications (non-pressure)
• For Log Homes
• For straight pipe runs of 30 ft. (9.1 m) or longer
• CSA Certified, IAPMO Listed

Our Return Policy

If you are not completely satisfied with your purchase, in most cases, you can return it for a refund within 90 days.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More