Home Hardware
3/4" Mixing Valve for Water Heater

3/4" Mixing Valve for Water Heater

  • Item # 3285046
  • Model # 206034
remove_circle add_circle






Every year, thousands of people suffer serious thermal shock or scalding injuries in their bathtubs, sinks and showers. Additional untold numbers become ill due to water-borne bacteria, such as Legionella. Watts Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature, helping to minimize thermal shock.

Details + Specification

  • This full flow valves is designed to maintain and limit the hot water to a temperature chosen by the installer
  • Ideal for use in domestic water systems at the hot water source, such as boiler, water heater, tankless heater or storage tank
  • Superior flow characteristics and exacting temperature control of the L1170 also make it ideal for radiant heat systems, commercial and industrial applications
  • Specifically engineered for mixing hot and cold water on hot water supply systems
  • Can be used for a variety of applications to reduce the temperature of the the hot water supply to the system
  • Double-throttle design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber
  • An added feature incorporates check valves in both the hot and cold water inlets to protect against cross flow
  • Minimum flow requirements to maintain set temperature
  • Valve size: 3/4" with solder connections
  • ASSE standard 1017 listed
  • Integral check valves
  • Proportional flow design - controls both hot and cold supply to the mixed water outlet
  • Superior flow characteristics: - Low pressure drop - Accurate temperature control
  • Easy installation - union solder
  • Heavy duty rugged construction
  • Made from brass castings
  • Repairable - uses replaceable elements
  • Energy saving design by extending the amount of hot water available
  • Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
  • Minimum pressure: 30 psi
  • Recommended inlet temperatures: Hot inlet: 120 - 200 degrees F (48.9 - 93 degrees C) Cold inlet: 40 - 85 degrees F (5 - 9 degrees C)
  • Minimum differenetial temperature: 15 degrees F (-9 degrees C)
  • Maximum temperature: 200 degrees F (93 degrees C)
  • Maximum pressure: 150 psi
  • Temperature out field range: 80 - 120 degrees F (27 - 49 degrees C), adjustable, accurate within plus or minus 3 degrees F (1.5 degrees C)
  • Body: 3/4" - 1" (20-25mm) size - brass
  • Disc: stainless steel
  • Thermostat assembly: copper
  • O-rings: Buna-N; EPDM
  • Pistons: Udel - P1700
  • Springs: stainless steel
Free Shipping to Stores

Free Shipping to Stores

Pick-Up is Easy

Pick-Up is Easy

Free Returns

Free Returns