Product Overview
Description
Black Jack Waterproofing Sealer is a safe to use, water based, breathable, high binding, clear acrylic, penetrating sealer/primer. It seals, waterproofs, primes and protects. Goes on milky white but dries clear.
- Is an environmentally safe, water based, breathable, high binding, clear acrylic, penetrating sealer/primer
- It seals, waterproofs, primes and protects
- It goes on milky white but dries clear
- Safe to use - will not harm humans, animals or vegetation
- Water based - no petroleum distillates - easy water cleanup
- Goes on white for ease of application, but dries clear
- Fast drying - approximately 1 to 2 hours depending on temperature and humidity
- Paintable with acrylic/latex and oil based paints
- Tintable using water based colourants
- Resists mildew, staining, salts and acids
- Cleans up with soap and water
- Can be used indoors
- Ready to use - do not dilute
- Do not apply at temperatures below 10'C
- Keep from freezing
- For best results, surface should be clean and dry
- Repair all cracks
- Smooth concrete floors should be etched to allow penetration
- Do not use on surfaces treated with water repellent coating
- Apply with hand pump, low pressure, or airless sprayer
- Brush or roller may be used if an even saturated coat is carefully applied
- Cover areas not to be sealed (such as windows) prioir to spraying
- Use caution when spraying on windy days
- Apply second coat to porous surfaces after first coat has dried for at least 1 hour
- Actual coverage will vary depending on the porosity of materials
- Stucco: 4.3m2/L / 175 sq. ft./4L
- Concrete + wood siding: 4.9m2L / 200 sq.ft/4L
- Concrete block: 2.5m2/L / 100 sq.ft/4L
- Brick: 3.7 m2/L / 150 sq.ft/4L
- Porous tile: 4.9m2/L / 200 sq.ft/4L
- Wood shingles: 3.1m2/L / 125 sq.ft/4L
- Chalky surfaces: 7.4m2/L / 300 sq.ft/4L
- For second coat application add 50% to the figures above
- Generic type: acrylic emulsion
- Colour: white, dries clear
- Percent solids by weight: 10% +/- 1%
- Percent solids by volume: 9.5% +/- 1%
- Viscosity: 7.5 cps
- PH: 7.5 - 8.0
- Specific gravity: 1.02
- Flash point (Closed Cup): none
- VOC: none
- Drying time: touch 1 - 3 hours
- Recoat: 1 hour after first coat is dry
- Reduction solvent: water
- Clean up: water
- Type of cure: coalescence
- Recommended coverage: 5 mils dry (5 mils wet)
- Freeze thaw stability: 10 cycles ASTM-D1173-70
- Particle size: a 0.15 micron
- Acid No: a 25
- Water permeability meets U.S. Federal Specifications T-P-0035
- Water Permeance of Masonry meets ASTM E-514-74
- Moisture Vapour Transmission meets ASTM D-1653
Our Return Policy
If you are not completely satisfied with your purchase, in most cases, you can return it for a refund within 90 days.
Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.
Learn MoreSpecifications
Assembled Product Length | 6.625" |
---|---|
Assembled Product Width | 4.125" |
Assembled Product Height | 11" |
Product Weight | 9.545 LB |
Brand | EXCEL |
Model | 5990-0-80 |
Package Weight | 8.96 lbs |
Package Length | 6.50 in |
Package Width | 6.60 in |
Package Height | 7.60 in |