DRYLOK Masonry Latex Base Waterproofer - Clear, 3.78 L

The answer to your waterproofing problems is clear. If water is leaking through existing masonry or you need to protect new construction, Drylok Waterproofer is guaranteed to stop water to 4 PSI. It is the first clear (non-pigmented), abrasion-resistant, high-gloss waterproof coating approved for floor and wall applications. Unlike ordinary paint that simply adheres to a surface and can be forced off by incoming water pressure, DRYLOK® Clear Masonry Waterproofer actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier. You can waterproof interior, exterior, above or below grade walls. DRYLOK® Clear Masonry Waterproofer is also perfect for floors, basements, retaining walls, decorative brick and stone facades, and more.

• Clear latex base waterproofer
• Stops hydrostatic pressure and resists wind driven rain
• Use on floors walls and decorative surfaces
• Provides a moisture/vapour barrier to floors prior to applying a floor covering
• Can be used as a top coat or under latex paint
• Apply with brush for best results but can be applied by roller or spray
• Coverage approximately 100 sq. ft. per gallon
• Dry time 2 hours recoat in 4 hours
• Light foot traffic in 4 hours heavy traffic in 24 hours
• High gloss finish

Our Return Policy

If you are not completely satisfied with your purchase, in most cases, you can return it for a refund within 90 days.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More