Home Hardware
7" Diameter x 18"L 1" Insulated Chimney Pipe

7" Diameter x 18"L 1" Insulated Chimney Pipe

  • SELKIRK
  • Item # 5534059
  • Model # 207018U
remove_circle add_circle

Overview

Assembled Product Length:

18"

Assembled Product Height:

7"

Assembled Product Width:

7"

Details + Specification

  • Locking band included
  • Stainless steel
  • For use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment normally produces flue-gas temperatures of 540 degrees C
  • Intended for use in accordance with the National Building Code of Canada, Installation Code of Oil Burning Equipment, CSA B139, and for Gas Burning Equipment, CAN-B149.1 and CAN-B149.2
  • 7" and 8" diameters may also be used with ULC labelled factory-built fireplaces where specified in fireplace manufacturer's installation instructions and identified on the ULC fireplace label
  • Are designed for gravity venting only
  • They are usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet
  • Are ideal for venting gas (natural and LP) and #2 oil
  • Standard stainless steels are used for all insulated parts
  • The smooth stainless steel inner liner produces rapid stabilization of strong draft and heats fast to minimize condensation as waste gases are exhausted
  • Outer casing carries structural loads leaving the inner pipe free to expand without stress
  • Special Low-K insulation filling the space between stainless steel walls is only 1 inch thick, yet it provides 17 times the insulating value of brick
  • This optimum density of insulation stops expan- sion noises and resists and contains surges of heat
  • This allows the system to be enclosed with only 2 inch clearance to cumbustibles
  • Does not contain asbestos
Free Shipping to Stores

Free Shipping to Stores

Pick-Up is Easy

Pick-Up is Easy

Free Returns

Free Returns