We’ve selected as your nearest store or select a different store
Please set a location to see pricing and to order online. Select a Store
Please select a Home store location and click “make this my store”
A Table to Floor You

A Table to Floor You

Designed from luxury laminate flooring that is tough, durable, and beautiful.

What You'll NeedLaminate Table
  • Seaside laminate flooring (we used 3 boxes)
  • 4' x 8' sheet of 1/2" plywood (1)
  • No More Nails construction adhesive 2032-983
  • Weather Shield caulking 2034-346
  • caulking gun 2034-025
  • 6" casters (pk of 4)
  • 1/4" x 11/2" zinc hex lag screws (4 pkgs) 2162-126

Here's Howinstructions
  1. Fit laminate boards together to your desired finished width (shown: 391/2"). The length of the table will be the length of your boards (shown: 477/8" long) minus trimming the ends to 45°.
  2. Cut the ends of the boards to a 45° angle. Also cut the edges of the outer boards to a 45° angle (see drawings on website). This will ensure that the table edges have neat seams.
  3. Build a plywood frame to fit inside the outer laminate cladding (see drawing on website). Fasten plywood top to frame.
  4. Trim or sand the edges of the plywood frame by about 1/8" to allow for adhesive along the edges of the frame.
  5. Cut and install corner gussets to hold the casters.
  6. Glue and attach laminate boards taking care not to damage edges. Use acrylic caulking in the cut joints. Make the bottom of the laminate flush with the bottom of the plywood frame.
  7. Attach casters.
loading image