EXCEL Acrylic Waterproofer Sealant - Clear, 3.78 L

Black Jack Waterproofing Sealer is a safe to use, water based, breathable, high binding, clear acrylic, penetrating sealer/primer. It seals, waterproofs, primes and protects. Goes on milky white but dries clear.

• Is an environmentally safe, water based, breathable, high binding, clear acrylic, penetrating sealer/primer
• It seals, waterproofs, primes and protects
• It goes on milky white but dries clear

ADVANTAGES:

• Safe to use - will not harm humans, animals or vegetation
• Water based - no petroleum distillates - easy water cleanup
• Goes on white for ease of application, but dries clear
• Fast drying - approximately 1 to 2 hours depending on temperature and humidity
• Paintable with acrylic/latex and oil based paints
• Tintable using water based colourants
• Resists mildew, staining, salts and acids
• Cleans up with soap and water
• Can be used indoors

PREPARATION:

• Ready to use - do not dilute
• Do not apply at temperatures below 10'C
• Keep from freezing
• For best results, surface should be clean and dry
• Repair all cracks
• Smooth concrete floors should be etched to allow penetration
• Do not use on surfaces treated with waterrepellent coating

APPLICATION:

• Apply with hand pump, low pressure, or airless sprayer
• Brush or roller may be used if an even saturated coat iscarefully applied
• Cover areas not to be sealed (such as windows) prioir to spraying
• Use caution when spraying on windy days
• Apply second coat to porous surfaces after first coat has dried for at least 1 hour

COVERAGE GUIDELINES:

• Actual coverage will vary depending on the porosity of materials

MATERIALS:

• Stucco: 4.3m2/L / 175 sq. ft./4L
• Concrete + wood siding: 4.9m2L / 200 sq.ft/4L
• Concrete block: 2.5m2/L / 100 sq.ft/4L
• Brick: 3.7 m2/L / 150 sq.ft/4L
• Porous tile: 4.9m2/L / 200 sq.ft/4L
• Wood shingles: 3.1m2/L / 125 sq.ft/4L
• Chalky surfaces: 7.4m2/L / 300 sq.ft/4L
• For second coat application add 50% to the figures above

SPECIFICATIONS:

• Generic type: acrylic emulsion
• Colour: white, dries clear
• Percent solids by weight: 10% +/- 1%
• Percent solids by volume: 9.5% +/- 1%
• Viscosity: 7.5 cps
• PH: 7.5 - 8.0
• Specific gravity: 1.02
• Flash point (Closed Cup): none
• VOC: none
• Drying time: touch 1 - 3 hours
• Recoat: 1 hour after first coat is dry
• Reduction solvent: water
• Clean up: water
• Type of cure: coalescence
• Recommended coverage: 5 mils dry (5 mils wet)
• Freeze thaw stability: 10 cycles ASTM-D1173-70
• Particle size: a 0.15 micron
• Acid No: a 25
• Water permeability meets U.S. Federal Specifications T-P-0035
• Water Permeance of Masonry meets ASTM E-514-74
• Moisture Vapour Transmission meets ASTM D-1653

Our Return Policy

To be eligible for a return, refund or exchange, merchandise must be unused, undamaged, in its original packaging, and accompanied by the original bill of sale. If you're not satisfied that the items meet your needs, Home Hardware stores will accept the return of most regularly stocked items within 90 days of purchase. All refunds will be issued to the original method of payment.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More