STONESAVER Concrete & Paving Stone Cleaner & Surface Prep - 1 L

Stonesaver Concrete Cleaner and Surface Prep is an easy to use product that cleans dirt, white salt deposits and tire tracks that will not harm your concrete or paving stone surfaces. Use of this material will ensure proper sealer to surface bonding and does not contain muriatic or hydrochloric acids which can damage concrete surfaces. Application is made easy with the auto-diluting E-Z Sprayer.

• Cleans dirt, efflorescence & tire tracks - Will not harm concrete surfaces
• Ensures proper sealer to surface bonding - Easy to use with auto-diluting E-Z Sprayer
• Formulated to remove efflorescence (white saltdeposits), dirt and tire tracks from your paving stone and concrete surfaces - Contains no muriatic or hydrochloric acids whichcan damage concrete surfaces
• The proper removal of dirt and efflorescence isimperative to ensure sealer to surface bonding and enhance the surface colour prior to sealer application
• Comes complete with the "E-Z Sprayer" waterhose end adapter, which automatically dilutes and disperses this highly concentrated cleaner at a ratio of 20 parts water to 1 part cleaner which eliminates chemical mixing procedures and the need for costly professional equipment or the inconvenience of using heavy jug dispensers

DIRECTIONS: - (Step 1) Remove all stains with the appropriateStonesaver stain cleaners

• (Step 2) Simply attach your water hose to theinlet port of the E-Z Sprayer and you are ready to start; always pre-wet the surface with water before each application of Stonesaver Cleaner & Surface Prep; working quickly, start at the lowest point of your surface and work in 27 sq. m (300 sq. ft.) pre measured sections; work side to side, making sure the entire surface is covered; if there is still cleaner remaining in the bottle after the 300 sq. ft. section has been covered, apply the remaining cleaner as an additional spray over the same area; this will reinforce the cleaning application and prevent drying of the surface; use a long handled stiff bristled broom to brush the treated area, loosening stubborn dirt and deposits; rinse thoroughly (usually 5 - 6 rinses with 2 waterhoses) until foaming is no longer visible; be sure to rinse all cleaner from the surface as you progress to additional sections until the entire surface is cleaned and thoroughly rinsed; do not let cleaner dry on surface; an additional water hose will facilitate rinsing; mist surface with water if it begins to dry while cleaning; when the entire surface is cleaned and well rinsed, allow to dry and inspect; repeat application to any white areas if necessary
• (Step 3) Seal the surface using the appropriateStonesaver sealer

COVERAGE: - If used in accordance with supplied directions; 1litre/1 Quart covers a maximum 27 sq. m (300 sq.ft.)

• Do not mix with oven cleaners, bleach or otherhousehold chemicals; do not swallow; do not get in eyes; do not get on skin or clothing; do not breathe fumes; handle with care; keep out of reach of children; wear a NIOSH-approved respirator; wear rubber gloves and safety goggles; use only in a well-ventilated area

FIRST AID TREATMENT:

• Contains Phosphoric acid, Sulfuric acid andSodium dodecyl diphenyloxide disulfonate; if swallowed, call a Poison Control Centre or doctor immediately; do not induce vomiting; if in eyes, rinse with water for a least 15 minutes; if on skin, rinse well with water; if on clothes, remove clothes; if breathed in, move person to fresh air

Our Return Policy

To be eligible for a return, refund or exchange, merchandise must be unused, undamaged, in its original packaging, and accompanied by the original bill of sale. If you're not satisfied that the items meet your needs, Home Hardware stores will accept the return of most regularly stocked items within 90 days of purchase. All refunds will be issued to the original method of payment.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More