CUT-N-SEAL End Cut Wood Preservative - Sienna, 946 ml

Cut-N-Seal® is a colour-matched, brush-on wood preservative for cuts and holes in pressure treated wood that expose untreated wood in above ground applications. The copper-based, waterborne formula is low VOC and low odour. Cut-N-Seal is not to be used in preserved wood foundations, to recoat pressure treated wood surfaces, or as a replacement for pressure treatment. Not for use in Dwellings.

• Brush on two coats of Cut-N-Seal wood preservative on all cuts and holes in pressure treated wood that expose untreated wood
• For use above ground on deck boards, railing, post tops, and fence boards - Protects cut ends against rot and decay
• Copper-based, waterborne formulation
• Low VOC and low odour
• Ready to use; shake or stir before and during use
• Apply by brush; do not spray or dip.
• Apply above 10ºC; keep from freezing
• Soap and water clean-up
• Sienna/cedar colour closely matches brown pressure treated wood
• 946 ml
• **NOTE** Does not replace pressure treatment

Specifications (pdf)

Our Return Policy

To be eligible for a return, refund or exchange, merchandise must be unused, undamaged, in its original packaging, and accompanied by the original bill of sale. If you're not satisfied that the items meet your needs, Home Hardware stores will accept the return of most regularly stocked items within 90 days of purchase. All refunds will be issued to the original method of payment.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More