Product Overview
- **NOTE** This wood insert is to be installed into a solid fuel masonry or factory-built zero-clearance only (see masonry & zero clearance requirements below); image not exactly as shown (faceplate not included; must be ordered separately)
- Recommended surface: 500 to 1600 sq. ft.
- Maximum output - EPA test wood using soft wood: 34,000 BTU/h
- Maximum output - seasoned cord wood (hardwood): 60,000 BTU/hr
- Glass with cast iron frame door
- Flat black
- Exterior: 28-3/8" W x 23-3/8" D x 21" H
- Firebox: 21" W x 13-3/4" D x 11-1/8" H
- 6" flue pipe diameter
- Minimum chimney height: 12'
- Maximum log length: 20"
- 1/4" steel thickness
- Clearances to combustible: Combustible top mantle to unit: 22" Combustible shelf to unit: 29" Combustible side wall to unit: 13" Combustible side mantel to unit: 10"
- Minimum floor protection at the front: 18"
- Minimum masonry opening: 28-7/8" W x 12-3/4" D x 21-3/8" H
- The masonry fireplace must meet the minimum code requirements, or NFPA 211 or the equivalent for a safe installation. Contact your local Building Inspector for requirements in your area
- It is possible to install a wood insert into an existing factory-built zero-clearance fireplace. However, there currently exists no UL or ULC standard specific to that type of installation. The first thing that must be verified is that the factory-built zero clearance fireplace is listed (it must be certified by a competent certification body such as Omni or Warnock Hersey). It must be suitable for use with solid fuel and nothing in the owner's manual must specifically prohibit the installation of a fireplace insert (Please refer to the owner's manual before you install)
- Minimum/maximum projection in the room: 8.25"/10"
- Maximum heat output of 60,000 BTU
- Includes a heat-activated 130 CFM blower
- 1.9 cubic foot firebox
- Air-wash system
- Optimum efficiency : 75%
- Tested by OMNI as per applicable standards (CSA/UL/ULC and/or others)
- 29" x 44" faceplate with nickel trims HH #5531-441
- Adapter for fresh air kit (5" diam.) #AC01298
- Door gasket and silicone replacement kit HH #5541-096
- Flat black aerosol paint #AC05956
- Glass gasket repl. Kit # AC06400
Specifications
| Brand | DROLET |
| Assembled Product Length | 23.37" |
| Assembled Product Width | 28.37" |
| Assembled Product Height | 21" |
| BTU Output | 60000 |
| Colour Family | BLACK |
