Home Hardware

Pro-2000 High Precision Altimeter

  • ZIPLEVEL
  • Item # 1037031
  • Model # ZLP-100
Please select your store to see pricing. Select Store

Overview

Assembled Product Length:

7.5"

Assembled Product Height:

16.0"

Assembled Product Width:

10.5"

The revolutionary ZIPLEVEL® PRO-2000 is a high precision altimeter that not only levels but reads elevations in unmistakably clear digits. A press of the Measurement Module Zero key anywhere within the 40’ vertical set up range sets an infinite size level benchmark plane. It’s like setting a laser instrument height at the elevation where you might wish to level. ZIPLEVEL adapts to you rather than making you adapt to a laser with a rod and sensor. You can instantly level or adjust forms by yourself for true one man operation. The ZIPLEVEL PRO-2000 High Precision Altimeter includes 100 ft. (30m) Cord, Unipod, Stakes, Protective Boot and User Guide.

Details + Specification

  • True one-person operation
  • 100 foot cord
  • Displays elevations directly with 1/8" (2mm) precision
  • "Sees" around or over visual obstructions
  • Set up vertical range is equivalent of a 40' (12m) rod and 20' (6m) tripod
  • Measures over any elevation or distance on earth without calculations
  • Built job-site rugged and never needs factory calibration
  • Setup/pack-up time: typically less than 30 seconds to unpack, zero and read
  • Ranges: 40' vertical by 200' horizontal circle - unlimited ranges in carry function
  • Typical isothermal accuracy: greater than 0.1" or 0.15% of measured elevation
  • Temperature range: -22°F to +159°F (-30°C to +70°C) operating; -40°F to +158°F (-40°C to +70°C) storage
  • Drop resistance: 5' (1.5m) for measurement module or 3' (0.9m) for base unit onto concrete
  • Water resistance: can be lightly rinsed with a hose but cannot be immersed
  • 9V battery life: 1 year of typical daily use
  • Memory life: saves latest data and settings indefinitely even without a battery
  • PC serial port: IR output for optional PC serial interface cable
  • Unipod length: 15" (38.1cm) to a calibrated 48" (121.9cm)
  • Weight: 12 lbs (5.50 kg) total weight; 1 lb (0.45 kg) for the measurement module
  • Size: 16.0" H x 10.5" W x 7.5" D (40.8 cm x 26.7 cm x 19.1 cm) for base unit and 3.75" H x 4.75" W x 1.75" D (9.6 cm x 12.1 cm x 4.5 cm) for measurement module with boot
FUNCTIONS:
  • Auto-off: shuts unit off after 4 min. without movement or key presses to preserve battery
  • Hold: freezes the display if not in view - also used with other functions
  • Zero: sets display to read zero at a reference (same as setting the target on a rod)
  • Scale: for readings in fractional or decimal inches, feet or meters
  • Res: for faster, less precise rough readings
  • Mark: lets you sound leveling or limit tones to supplement the display
  • Record: gives average, minimum or maximum of any number of readings
  • Cal: calibrates accuracy of vertical readings (like calibrating a rod)
  • Temp: displays ambient temperature - useful in concrete work or with adhesives
  • Adder: adds case dimension for inside readings
  • Carry: allow unlimited ranges without tabulation or calculation
  • Elevation: for setting readings in sea level elevation at a known survey monument
  • Record data: stores up to 137 readings for later recall
  • Inspect/dump: view stored data or dump to PC for tables, profiles, 3D or Topo maps
  • Monitor: logs data on a PC to monitor levels of tanks, lakes or streams
Free Shipping to Stores

Free Shipping to Stores

Pick-Up is Easy

Pick-Up is Easy

Free Returns

Free Returns