MITEK Steel Jack Post - Adjustable from 69" - 108"

Solid gauge steel provides this jack post with the strength, durability and dependability you need to support carport roofs and beams carrying up to two wood frame floors.

• Used to support carport roofs and beams carrying loads not more than two wood frame floors, where the length of joists carried by such beams does not exceed 16' and a live load on any floor does not exceed 50 lbs/sq. ft. - Adjustable height: 69"-108"
• Working stress 8,090 lb
• Factored resistance 11,650 lb

MATERIALS: - 3 gauge steel plates (comes with (2) 3.5" x 6.5" and (1)3.5" x 6" top plate loose in box)

• 12 gauge outer tube (2-3/4" O.D.)
• 11 gauge inner tube (2-1/2" O.D.)

INSTALLATION:

• Elevate top tubing to approximate height and insert locking pin
• Rotate jack screw to desired height, then fasten top plate in position
• Ensure top and bottom plates are properly fastened to supported beam members and properly aligned to the supporting base footing
• Always ensure product is installed at 90° to beam and footing

Our Return Policy

To be eligible for a return, refund or exchange, merchandise must be unused, undamaged, in its original packaging, and accompanied by the original bill of sale. If you're not satisfied that the items meet your needs, Home Hardware stores will accept the return of most regularly stocked items within 90 days of purchase. All refunds will be issued to the original method of payment.

Lumber, Building Materials, Furniture and Major Appliances return policies are subject to your local store.

Learn More