Home Hardware
Wire-In Front Load Smoke Detector, with Battery Backup

Wire-In Front Load Smoke Detector, with Battery Backup

  • KIDDE
  • Item # 3616698
  • Model # P1276CA
remove_circle add_circle

Overview

Assembled Product Length:

5.51"

Assembled Product Height:

1.77"

Assembled Product Width:

5.51"

Details + Specification

  • Ionization technology: better at detecting fast flaming fires
  • 120V AC direct wire: interconnects with up to 24 units of which 18 can be initiating
  • 9V battery backup (included): continuous protection in of power failure
  • Front loading battery door: provides easy access, which reduces the installation time and battery replacement time, allowing one to change battery without removing alarm from bracket
  • Tamper resistant: allows the unit to be locked to its base to prevent the alarm from being removed from the ceiling or wall, door can be locked to prevent battery removal
  • Low battery indicator: a warning chirp sounds at the end of the alarm life to indicate it needs replacement
  • Interconnectable: any unit that senses a problem automatically triggers all units throughout the home immediately, allowing extra time for escape - meets building code
  • Quick connect: installs quickly with snap-on wire harness
  • Test/reset button: verifies alarm operation and immediately silences the alarm
HUSH FEATURE:
  • Quickly silences nuisance alarms
  • Wait at least 7 minutes for the Hush mode chirp to cancel on its own
  • Any chirps after this time will indicate a defect or a low battery
  • Reinstall the battery making sure that hand does not touch the Hush Button, and making sure that it is not resting/pressing on a table when inserting the battery (as this will automatically press the Hush)
ELECTRICAL RATING:
  • 120V AC, 60Hz, 80mA, 9V battery backup
WIRING:
  • Quick connect plug with 8" pigtails
Free Shipping to Stores

Free Shipping to Stores

Pick-Up is Easy

Pick-Up is Easy

Free Returns

Free Returns