by Ralph Swan
I enjoy finding ideas that can stand the test of time. This project was inspired by an early 1900s, not-for-sale display piece I came across in an antique market in Barrie, Ontario. Since purchasing the item was not an option, I took the opportunity to create my own contemporary, sleeker version. I envisioned this piece of furniture finished in the new Minwax® Polyshades Espresso Satin colour, trimmed with brushed aluminum hardware. With my smartphone, a borrowed yardstick from a nearby display, and pen and paper, I captured dimensional details and a rough drawing of the general construction.
My next step was to refine my drawings and create a material list of lumber and hardware before visiting my local Home Hardware Building Centre. The lumber selection of different species gave me many options. I decided to go with laminated pine for the tabletop (or shelves in the other positions), and 1" x 3" maple for the base. For me, walking around the store looking at all the different hardware and imagining how it can be used makes me appreciate the variety. After selecting hinges, screws, corner brackets, dowels, glue, flat and angle aluminum bar stock, and finishing supplies, I was ready to get building my project.
I find that the success of any great project lies in having a good plan and knowing what to expect from the tools and materials. Remember to always test tools for results by using a scrap piece or off-cut to ensure they are set to cut or shape properly. Create a large sample colour board to practice your finishing technique, and to ensure the colour selection is right for the project. This builds confidence to complete the project with a clear expectation of results.
Hopefully you are as inspired as I was, and you'll enjoy building this versatile piece of furniture for your home.That's the finish
Ralph Swan is a wood care expert from Minwax® and a frequent contributor to Home at Home magazine.
Clevis pins can be removed easily without tools, allowing the unit to pivot into tiered display shelves or a vertical bookcase. Simply align the pre-drilled holes and secure into position with the clevis pins.What you'll needTools Materials
- hinges (5 pairs) 2411-107
- 3" corner braces (4) 2379-090
- 6" mending plates (8) 2379-820
- #8 x 11/4" zinc flat head screws (1 pk) 2173-560
- #6 x 5/8" zinc flat head screws (1 pk) 2174-097
- aluminum flat bar 1/8" x 11/2" x 8' (2)
- aluminum angle 3/4" x 3/4" x 3/32" x 8' (2) 2193-227
- clevis pins 5228-087
- pine shelf 3/4" x 12" x 36" (5) 2546-591
- maple moulding 3/4" x 21/2" x 72" (8)
- Minwax® Polyshades Espresso Satin 1872-968
- Krylon® Satin Nickel 1720-653
- Purdy 2" XL glide angle brush 1612-060
- Trim 12" boards for tabletop/shelves to size.
- Cut aluminum angle to match the depth of the shelves (approx. 12").
- Dado out bottom sides of each shelf for aluminum angles.
- Pre-drill and countersink holes in bottoms of angle pieces and install onto shelves.
- Lay the shelves out, side by side, on top of the two rear 3/4" x 21/2" braces.
- Mark positions of hinges, and recess into bottoms of shelves and
- Pre-drill and countersink holes in flat aluminum bar for pivot at front edges of each shelf.
- Assemble tabletop, and test pivoting action of shelves.
- Using 3/4" x 21/2" maple, cut radius corners on the top and bottom horizontal side supports.
- Cut verticals to length and assemble to horizontal side supports using pocket hole screws or dowels and glue.
- Shoes of side frames are cut from 3/4" x 21/2" maple. Router all top edges of shoes to create a profile.
- Cut base braces to length and assemble base.
- Attach base to underside of the tabletop/shelf assembly using corner braces and mending plates for spacers.